6 Apr 2007, 21:02 (Ref:1885134)
|
#41
|
Veteran
Join Date: May 2004
Posts: 1,479
|
Quote:
Originally Posted by terence bower
Radio speaker housing 2kg,as for losing strength by removing the B,Boxes,they do not remove any strength Esper,they are not attached in anyway to add it originally,The rear baffle plates in the front wings can also come out,while the wings are off its also a good idea to have some holes in the inner wing support panels to minimise the heat build up under the bonnet and channel it down into the sills
Then we go onto the boot lid,dont bother with the alloy skin,it weighs as much as steel,all the boot reinforcing frame can be drilled,the cross member in the Bonnet can be removed,there are lots more tricks,but we must not give too many secrets away,can we?
|
to be very honnest i had most of them, but not all! after all you made King Frizys car the most beautifull we had overhere and it was the lightest then as well!!! (but one thing heat is never going down! so you generate awfull airspeeds up there)
|
|
__________________
did anyone find my 3/4-7/8 GEDORE ringspanner at SPA?
|