|
But then again...
9.2 - Gearbox
9.2.1 Maximum 6 forward speeds.
9.2.2 Electronic or electric management and selection devices, and semi-automatic or automatic transmissions are
not permitted.
9.2.3 Only for SR1, a single switch may operate several systems (Art. 1.10) including the control of a value but if, for
any reason whatsoever, these systems do not respond to the driver's order or if the value checked is not the
good one, the driver will have to actuate the switch again.
The problem is that there is no specific reference to TC in the 04 rules...
|