Quote:
Originally Posted by Al Weyman
Wouldnt a piece of kit like this saved all that head pulling, I mean for a start its bloody agro to do at the track then there is the cost of the gaskets. http://www.precisionmeasure.com/test1.htm It says it may not work on all OHC engines as the valve action has to be stopped but I would have thought ideal for the Minis and yanks.
|
Maybe, but on an A series engine you will have to remove (possibly loosen) 4 of the head nuts to remove 2 push rods so you may as well have the head off as I certainly would not risk a cracked head or not replacing the gasket after doing so.