|
Hi there, I can confirm that what Zeff says is correct (as ever !!) & can also add that this ebay sellers part is what you need ; I bought 1 from him 2 months ago & is what is currently in our race car.
One important thing is that over time the 28mm hole becomes oval due to the sideways force of the slave cyl on it & results in a loose fit of the slave which will lose you some pedal travel. Best is to sleeve the bellhousing if possible, or use a 2nd circlip at the base of the slave cyl before you pass it thru the bellhousing to create a tighter fit, though this does mean that the actual retaining circlip becomes quite difficult to fit.
Hope this helps.
|